$1,589

Root Cause Analysis and CAPA using 8-D Problem Solving Method (com) A

Event Information

Share this event

Date and Time

Location

Location

Huntsville

Huntsville, AL 35801

View Map

Refund Policy

Refund Policy

No Refunds

Event description

Description

Root Cause Analysis and CAPA using 8-D Problem Solving Method


*** LIMITED TIME OFFER: FREE $100 AMAZON GIFT CARD! ***
REGISTER TODAY!


Errors and defects are a problem in virtually every industry. The goal of defect-free/error-free product or service delivery is the aim of every company. However, in order to eliminate defects or errors permanently, you must use a disciplined approach in order to ensure that the problem does not recur. One of the most widely-used tools is the 8 Disciplines (8D) methodology. 8D requires you to identify and fix the problem immediately (put a bandaid on it) while identifying the Root Cause(s), and take steps to address the problem in the short term as well as in the long term (permanent fix).

In this interactive workshop, you’ll learn how to apply the many tools used to identify possible causes, determine (with data) which is the true root cause (or causes, as there may be some compounding of problems occurring), and how to fix them – permanently.

8D is used by a wide variety of industries – from service to design, manufacturing, and fulfillment. 8D has been used by sales forces, development teams, hourly personnel, and C suite effectively, and is a technique that is easily mastered.

One of the biggest detractors to using the 8D technique is that it does not always address the issue fully. However, after studying the reasons behind this weakness, I’ve developed an additional emphasis to minimize risk and maximize success using the 8D framework. This is the only course that teaches this additional emphasis, and I developed this methodology when I was hired by Motorola to eliminate returns for a particular defect (after previous efforts had seen the defect return). I’ve been teaching this “magic bullet” method ever since.

The course is highly interactive and will require all participants to work through examples in class, allowing you to learn experientially as well as through lecture. Class notes are provided so you can concentrate on what we’re talking about vs. taking copious notes.

In this two-day workshop seminar, you’ll learn how broad-based this technique is, how it can be easily adapted for a wide variety of industries, and how to participate in, and lead, an 8D team.

Seminar Fee Includes:
Lunch
AM-PM Tea/Coffee
Seminar Material
USB with seminar presentation
Hard copy of presentation
Attendance Certificate
$100 Gift Cert for next seminar

Learning Objectives:

Upon completing this course participants should be able to:

  • Explain what 8D is and how it is applied

  • Understand where 8D is used in the PDCA cycle

  • Apply various tools and techniques to describe the problem more accurately

  • Understand what is a Root Cause of a problem, vs. what is a symptom of the problem

  • Understand which types and severity of problems should initiate a formal Root Cause Analysis (RCA)

  • Utilize a Risk Based approach to identifying Root Cause Analysis

  • Apply RCA to Context of the Organization and Risk Analysis

  • Evaluate effectiveness of proposed Corrective Actions in addressing the Root Cause

  • Apply various tools to RCA and 8D

  • Understand the difference between short-term/interim solutions and long-term/permanent solutions.

  • Participate in an 8D team

  • Apply various quality tools to determine long-term solutions

  • Lead an 8D team successfully

  • How this fits into the Corrective and Preventive Action (CAPA) program

  • Determine when to stop collecting data/evidence of effectiveness

  • How to use 8D when answering Supplier Corrective Action Requests (SCARs)

  • Apply this to your own organization effectively.


Who Will Benefit:

This course is designed for anyone who is participates in addressing Supplier Corrective Actions, internal corrective action programs, or who is tasked for eliminating or minimizing defects as part of a Continual Improvement (CI) program. This includes those that have Quality, Environmental, or Occupational Health/Safety Management Systems responsibilities for making general improvements in their organization’s performance, as well as the specialists in various areas who are the subject matter experts. A partial list of personnel who will benefit from the course:

  • Senior managers

  • Quality professionals

  • Environmental professionals

  • Occupational Health/Safety (OHS) professionals

  • Regulatory professionals

  • Production supervisors and managers

  • Manufacturing engineers

  • Production engineers

  • Design engineers

  • Process owners

  • Supplier engineers

  • Customer engineers

  • Quality, environmental, and OHS auditors

  • QMS, EMS, and OHS Management Representatives


AGENDA

Day 01(8:30 AM - 4:30 PM)

08.30 AM - 09.00 AM: Registration
09.00 AM: Session Start
Brief Background and History
Introduction to Root Cause Analysis (RCA) and Corrective and Preventive Action (CAPA)
Defining the what is, and what is not, RCA
Discussion on what constitutes a good CAPA
Why good Root Cause Analysis is key to good 8D / CAPA
The 8 Disciplines (8D) Overview
Review of each step
Learn the common tools to use at each step including
Is / Is not technique
5 whys
Pareto Diagram
Fault Tree Analysis
Paynter Chart
Fishbone (Ishikawa / Cause and Effect) Diagram
Hands-on Exercises - Tools


Day 02(8:30 AM - 4:30 PM)

Refresher/review of Day One – Key Concepts
Hands-on Workshop – problem-solving tools (group exercise)
Review exercise
Define / apply which tools are best at each step
Derive the best solution(s) to the problem
Hands-on Workshop – 8-D Problem Solving tool (group exercise)
Work on exercise in teams
Gather data as needed
Determine which tools to apply when
Propose optimum solution based on information at hand
Common Mistakes and how to Design around them
Solutions don’t “stick”
Solution did not solve problem permanently
Data collection until “the end of time”
No buy-in from users or management
Applying 8D to various problems
Defect elimination
Customer satisfaction improvement
Internal defects / rework elimination
Questions
Summary


SPEAKER

Mary F McDonald

Mary F McDonald,
CEO, McDonald Consulting Group

Mary F. McDonald is a process quality specialist with over 25 years’ experience in large industries and small enterprises. Her experience allows her to design unique solutions to difficult problems, synthesizing tools from Lean, engineering, quality, environmental, and health/safety disciplines.

Ms. McDonald is currently the CEO/CTO of the McDonald Consulting Group (McDCG) in Austin, TX. McDCG is a recognized leader in providing process improvement consulting to a wide variety of customers in the healthcare, high technology, service, automotive, aerospace, semiconductor, and manufacturing disciplines. Her clients include Bayer, EDS, the FAA (Federal Aviation Administration), Huawei/HiSilicon, IBM, Motorola/Freescale, the University of Texas, Texas A&M University, and many others.

She holds a Master’s in Industrial Administration degree from Union College, Schenectady, NY, and a Bachelor’s in Environmental Engineering degree from Worcester Polytechnic Institute, Worcester, MA. An author of several academic pieces, she is the recipient of many industry awards. She also holds numerous professional society memberships and is well-known in these circles.


Please contact the event manager Marilyn (marilyn.b.turner@nyeventslist.com ) below for:
- Multiple participant discounts
- Price quotations or visa invitation letters
- Payment by alternate channels (PayPal, check, Western Union, wire transfers etc)
- Event sponsorships

NO REFUNDS ALLOWED ON REGISTRATIONS
Service fees included in this listing.
-----------------------------------------------------------------
Metricstream Inc- New York Events List
http://www.NyEventsList.com
http://www.BostonEventsList.com
http://www.SFBayEventsList.com
-----------------------------------------------------------------

MYL190301CEV MYL190409UPA

Share with friends

Date and Time

Location

Huntsville

Huntsville, AL 35801

View Map

Refund Policy

No Refunds

Save This Event

Event Saved