Part II: attic and roof configurations that work and why

Actions and Detail Panel

Sales Ended

Event Information



Online event

Event description
Learn which roof and attic configurations work and why.

About this event


Using the building science and building code for attics and roofs, we will work through which roof and attic configurations work and why. Peter will work with a local high performance builder and roof/attic mock-ups to get into the nitty-gritty of materials, sequencing, and trades interaction for high performance attics and roofs. (webinar recorded February 14, 2019)


  1. Master roof and attic configuration best practices
  2. Select the right building materials for high performance attics and roofs
  3. Master construction sequencing of high performance attics and roofs
  4. Master trade interaction to achieve high performance attics and roofs


Free to view

Pay $25.00 for credit


Builders, remodelers, HVAC contractors, HVAC system designers, code officials, architects, home design professionals, building performance professionals, energy auditors, students, educators, apprentices and anyone with knowledge and interest in attics and roofs.


In order to receive credit for viewing this webinar, you'll need to pass a short quiz. A link to the quiz will be provided in your registration confirmation email. Separate registration is required for each individual requiring continuing education credit. Be aware that many accrediting agencies will not allow you to take the same course for credit more than once; therefore, if you attended this session at the conference you may not be able to receive credit for viewing the webinar.

All credits have different expiration dates, so it is to your advantage to take the quiz as soon as possible.

AIA Members of the American Institute of Architects will receive 1.25 LU/HSWs for this computer based course. This is an intermediate level course and expires 1.17.2022. Questions about AIA credits should be directed to Lonna Berg at 608.210.7157 or Click on the following link to read our AIA CES Provider statement:

BPI This webinar has been pre-approved for 0.63 BPI CEUs.

NARI This webinar is approved for 1.25 NARI CEUs.

RESNET This webinar has been approved by RESNET for 1.25 professional development credits.

WI-DSPS Wisconsin Department of Safety and Professional Services has approved this course for 1 CEU for the following credentials: Dwelling Contractor Qualifier Certification and UDC-Construction Inspector Certification. Note that you may not retake the same course for credit more than once during the 1-, 2- or 4-year term of your specific credential.

This course will not be pre-approved for GBCI credits; however, if you believe the content is applicable to your credential, you can self-report credits.


Peter Yost , Building-Wright

Peter Yost has been building, renovating, researching, and consulting on high performance homes for more than thirty years. His expertise ranges from construction waste management, material properties, field testing, and moisture analysis. Peter is technical director for the website, a research associate at University of Massachusetts Amherst's Building Technology Program, and lecturer at the Yale University Graduate School of Forestry and Environmental Studies. Peter has been a featured B4 presenter for more than ten years.


		Part II: attic and roof configurations that work and why image


This webinar was recorded on February 14, 2019 and is approximately 70 minutes in length.

Please see our FAQ page, call 608.210.7114 or email our registration contact:


Online event

Organizer Slipstream

Organizer of Part II: attic and roof configurations that work and why

Save This Event

Event Saved