$1,285 – $7,112

Design of Experiments (DOE) for Process Development and Validation (NTZ)

Event Information

Share this event

Date and Time

Location

Location

DoubleTree by Hilton Hotel Las Vegas Airport

7250 Pollock Drive

Las Vegas, NV 89119

View Map

Refund Policy

Refund Policy

No Refunds

Friends Who Are Going
Event description

Description

Prior to developing a process control plan as part of an overall risk management strategy, process development studies must be completed. The objective of these process development studies is to gain knowledge and understanding about how variation in process parameters explains variation in the product quality characteristics of the product.

The use of DOE methodology provides a means to identify process parameters which impact product quality (critical process parameters) and determine the functional relationship that links the process parameters to those critical quality attributes. Screening designs, such as 2k factorial and D-optimal designs, are used to determine critical process parameters. Response surface designs, such as Central Composite Designs (CCDs) and I-optimal designs, are used to model the functional relationship between those critical process parameters and the critical quality attributes.

This course will begin by presenting a primer on statistical analysis, focusing on the methods required for analysis of designed experiments. It will then present the steps to DOE, while demonstrating valuable risk management tools (Ishikawa and FMEA) which can be use pre and post DOE studies. Next, participants will learn to generate and analyze multiple screening and response surface designs; the participants will leave with an understanding of why and how each are used. Then, the participants will learn how results of the studies can be presented. Lastly, using the results of the studies, the risk management tools will then be updated.


Why you should attend:

The Global Harmonization Task Force (GHTF) Process Validation Guidance for Medical Device Manufacturers provides guidance on where design of experiments should be applied during process validation; it suggests the use of both screening and response surface designs during Operational Qualification. In addition, DOE should be used during multiple phases of design controls: design and development planning, design verification, design validation, design transfer, and design changes.

In Guidance for Industry Q8 Pharamaceutical Development (as well as the annex to Q8), suggests applying experimental design to demonstrate "...an enhanced knowledge of product performance over a range of...process parameters." Using this "...enhanced, quality by design approach..." leads to greater system understanding. That greater system understanding has two elements: identifying critical process parameters and developing a functional relationship that link those critical process parameters to your critical quality attributes (CQAs). This suggests the use of both screening and response surface designs during pharmaceutical development studies.

The need for DOE in product and process development is not only suggested, but imperative for both medical device and drug manufactures.


Areas Covered in the Session:

Learn how to effectively use JMP to:
  • identify critical quality attributes (CQAs) that will be used as responses in your designs
  • utilize risk management tools to identify and prioritize potential critical process parameters
  • identify critical process parameters and develop a functional relationship between those process parameters and your critical-to-quality attributes (CQAs) using both screening and response surface designs
  • be able to design and analyze screening designs including a factorial, fractional factorial, and D-optimal design
  • understand the need for adding center points to a design
  • be able to design and analyze response surface designs including central composite designs (CCDs), Box-Behnken designs, and I-optimal designs
  • present results of DOE studies
  • use systematic understanding from DOE studies to update the control plan that is part of the overall risk management plan

Who Will Benefit:

This webinar is designed for pharmaceutical, biopharmaceutical, and medical device professionals who are involved with product and/or process design:
  • Process Scientist/Engineer
  • Design Engineer
  • Product Development Engineer
  • Regulatory/Compliance Professional
  • Design Controls Engineer
  • Six Sigma Green Belt
  • Six Sigma Black Belt
  • Continuous Improvement Manager


Day 1 Schedule


Lecture 1:

Primer on Statistical Analysis
  • basic statistics
  • two-sample t-test
  • ANOVA
  • regression

Lecture 2:

Introduction to Design of Experiments (DOE)
  • steps to DOE
  • defining critical quality attributes (CQAs)/responses
  • identifying and prioritizing potential process parameters

Lecture 3:

Screening Designs
  • full factorial designs
  • 2k factorial designs

Day 2 Schedule


Lecture 1:

Screening Designs (continued)
  • fractional factorial designs
  • D-optimal designs

Lecture 2:

Response Surface Designs
  • 2k factorial designs with center points
  • Central Composite Designs (CCDs)
  • Box-Behnken designs
  • I-optimal designs

Lecture 3:

Utilizing Systematic Understanding from DOE Studies
  • presenting results
  • control plan/risk management strategy


Heath Rushing

Co-founder and Principal, Adsurgo

Heath Rushing is the cofounder of Adsurgo LLC and co-author of the book Design and Analysis of Experiments by Douglas Montgomery: A Supplement for using JMP. Previously, he was the JMP and Six Sigma training manager at SAS. He led a team of nine technical professionals designing and delivering applied statistics and quality continuing education courses. He created tailored courses, applications, and long-term training plans in quality and statistics across a variety of industries to include biotech, pharmaceutical, medical device, and chemical processing. Mr. Rushing has been an invited speaker on applicability of statistics for national and international conferences. As a Quality Engineer at Amgen, he championed statistical principles in every business unit. He designed and delivered a DOE course that immediately became the company standard required at multiple sites. Additionally, he developed and implemented numerous innovative statistical methods advancing corporate risk management, process capability, and validation acceptance criteria. He won the top teaching award out of 54 instructors in the Air Force Academy math department where he taught several semesters and sections of OR and statistics. Additionally, he taught Operations Research and simulation modeling at the Colorado School of Mines and designs and delivers short courses in statistics, data mining, and simulation modeling for SAS.


Please contact the event manager Marilyn below for the following:
- Discounts for registering 5 or more participants.
- If you company requires a price quotation.
Event Manager Contact: marilyn.b.turner(at)nyeventslist.com
You can also contact us if you require a visa invitation letter, after ticket purchase.
We can also provide a certificate of completion for this event if required.

NO REFUNDS ALLOWED ON REGISTRATIONS
-----------------------------------------------------------------
This Event Listing is Promoted by
New York Media Technologies LLC in association
with Netzealous LLC
http://www.NyEventsList.com
http://www.BostonEventsList.com
http://www.SFBayEventsList.com
-----------------------------------------------------------------
MYL170718CEV SHU170718OTH

Share with friends

Date and Time

Location

DoubleTree by Hilton Hotel Las Vegas Airport

7250 Pollock Drive

Las Vegas, NV 89119

View Map

Refund Policy

No Refunds

Save This Event

Event Saved