CA$0 – CA$1,450

ASM Edmonton Education Course: Corrosion

Event Information

Share this event

Date and Time

Location

Location

Room 8-207, Donadeo Innovation Centre for Engineering, University of Alberta

9211 116 St. NW

Edmonton, Alberta T6G1H9

Canada

View Map

Friends Who Are Going
Event description

Description

DESCRIPTION: This class presents an overview of the eight major corrosion processes and related corrosion monitoring, prediction and control mechanisms. The principles discussed are applicable to all metals. Emphasis is on practical applications of corrosion technology to industrial corrosion problems.

WHEN: Course begins January 9, 2018, and ends on April 17, 2018. Spots will be limited to 25 students.

WHERE: Room 8-207, Donadeo Innovation Center for Engineering, University of Alberta

REGISTRATION DEADLINE: December 15, 2017


WHO SHOULD ATTEND?

• Engineers and technicians facing corrosion issues and wishing to improve their knowledge in the area (Engineers, particularly civil, mechanical, and upstream, midstream, and downstream oilfield engineers and technicians)
• Those designing, specifying, or ensuring the quality of components facing corrosion threats (Designers, Specifiers, QA Managers)
• Managers overseeing work which corrosion impacts
• Metallurgists seeking to expand their knowledge of material degradation
• Chemical and petroleum industry specialists

COURSE INSTRUCTORS
The course instructors range from prominent professors and instructors at the University of Alberta with years of experience teaching to prominent industry experts with years of valuable experience in the field.

VENUE AND DATES
The program will run for 15 weeks on Tuesdays from 6 to 9 PM beginning Jan. 9, 2018, and ending on April 17, 2018. The course material has 15 lessons, so there will be roughly one lesson about every week. The electronic course material will be purchased at a group rate from ASM International and is included in the course fee.

COST AND BENEFITS

The program fees for this course are broken down in the "PRICING" section below, including the cost of the course notes from ASM International. If you took this course at ASM headquarters in Ohio in their 4-day format it would cost about $2,500 USD plus travel and lodging and the instructors would not have the Alberta experience that we offer.

Course materials (electronic notes), and a dedicated online chapter class are included in the course. The online class gives the students access to the accredited version of the course so that they can earn 3.0 Continuing Education credits. The online class can also be used as a forum for information-sharing and out-of-class activities. The course will also include membership in ASM International if you are not already a member; this itself is over a $125 value. For ASM members, the course will include a 1-year extension of your membership.

If you or your staff wish to upgrade your knowledge through continuing education we encourage you to enroll now. It will be at least two years before we will be able to repeat this course offer. Successful completion of the course will include an internationally recognized completion certificate.

WHAT YOU’LL LEARN
Upon completion of this course, you should be able to:

• Identify the eight major forms of corrosion and which are of concern for your applications
• Relate the occurrence and severity of corrosion to the natural driving forces
• Describe common corrosion test methods for your applications
• Avoid many of the design traps that speed corrosive decay
• Recognize applicable corrosion control techniques and their limitations

COURSE OUTLINE

ASM International Accredited Online Course 2017
• Lesson 1: The Effects and Economic Impact of Corrosion
• Lesson 2: Basic Concepts Important to Corrosion
• Lesson 3: Principles of Aqueous Corrosion
• Lesson 4: Forms of Corrosion
• Lesson 5: Types of Corrosive Environments
• Lesson 6: Corrosion Characteristics of Structural Materials
• Lesson 7: Corrosion Control by Proper Design
• Lesson 8: Corrosion Control by Materials Selection
• Lesson 9: Corrosion Control by Protective Coatings and Inhibitors
• Lesson 10: Corrosion Control by Cathodic and Anodic Protection
• Lesson 11: Corrosion Testing and Monitoring
• Lesson 12: Techniques for Diagnosis of Corrosion Failures

PRICING

Early Registration (on or before November 25, 2017):
$1250 – ASM & Affiliate Society Members (AWS, CWA, ASME, NACE, SME)
$1350 – Non-members
$460 – Students

Regular Registration (after November 25, 2017):
$1350 – ASM & Affiliate Society Members (AWS, CWA, ASME, NACE, SME)
$1450 – Non-members
$460 - Students
NOTE: GST is included in the prices.
Receipts will be issued at the event.

REGISTRATION BY EVENTBRITE
Eventbrite allows for easy registration and fee payment by credit card. However, please note that Eventbrite will charge a percentage based fee in addition to the course cost. If you wish to avoid this fee, please register by cheque.

REGISTRATION BY CHEQUE
Please register through Eventbrite and select the “Cheque” ticket type. Following registration, please contact the course coordinator (contact information below) and send a postdated cheque (January 1, 2018) for $200 to reserve your place; the remaining fee is due at the first class.

Make cheques payable to: “ASM International – Edmonton Chapter”

Mail cheques to:

ASM International – Edmonton Chapter
c/o Neil Anderson
University of Alberta, Donadeo Innovation Centre for Engineering
12th Floor, 12-203
9211 - 116 St NW
Edmonton, AB T6G 1H9


COURSE CONTACT INFORMATION
For more information contact the ASM Course Chair Neil Anderson by:
• Email: neil4@ualberta.ca
• Cell: 780-842-9471 (between 9:00 – 19:00)

OR contact the ASM Course Coordinator Prof. Weixing Chen by:
• Email: weixing.chen@ualberta.ca
• Phone: 780-492-7706 (days)

Share with friends

Date and Time

Location

Room 8-207, Donadeo Innovation Centre for Engineering, University of Alberta

9211 116 St. NW

Edmonton, Alberta T6G1H9

Canada

View Map

Save This Event

Event Saved