Intro to Welding and Metal Working
Sunday, January 30, 2011 at 10:00 AM (CST)
This class will introduce some of the basic features of welding to a complete beginer. We will talk about technique, preping for welding, and most importantly safety. This will be a 2 session class lasting 4 hours each session, starting on January 30th at 10am. I would recommend bringing a lunch or a snack, as we will try to go till at least 2pm.
The welding class will include the following:
- Metal Inert Gas / Gas Metal Arc Welding (MIG / GMAW)
- Wirefeed welding
- 1 day for open session/projects
- Basic skills
- Grinding, chopping, etc.
- Plasma Cutting
- Personal Protective Equipment
January 30, Day 1: Intro, cover basic technique, review safety (PPE), lay a bead of weld down. Review push/pull welding methods, holding MIG gun and begin welding stuff together. We will review weld penetrations, technique, etc.
Febuary 5, Day 2: Plasma Cutting, Grinding, and Welding Practice / Project Day
Important saftey info:
Wear comfortable clothing that is ideally cotton and flame resistant. There is a potential for your clothing to get damaged. We will provide a welding coat if possible, protective eyewear/welding mask, and welding gloves.
Pre-payment is required, no walk-ins, sorry. All payment is via paypal, and you must register for this class using eventbrite. Once this class is complete, you will be able to use the welders and plasma cutter at the hack factory if you're a TC Maker paying member. Payment will not be refunded once the class has started.
Where does my money go? It goes directly to the TC Maker/Hack
Factory. This helps pay for maintance, materials, and keeping our doors
open for you!
For more info email dave at drstrangelove dot net.
If this class is popular we will continue to run these as much as possible. There is a waiting list included with these tickets, if you don’t get in on this class we will put you in the queue for the next one. Or if there are cancelations we will give you 24 hours to respond and register.
Instructors: David Bryan And Tony
Some fun examples:
When & Where
Twin Cities Maker
We are community workshop in Minneapolis that is set up to make, share and teach skills to the community. For more info on our membership dues, and fees, check out our main website.